AWLPRIMER 545 EPOXY PRIMER
545 Epoxy Primer is a multi-use, corrosion-resistant epoxy primer used to seal undercoats and surfacing primers before applying finishes.
Description
545 EPOXY PRIMER
545 Epoxy Primer is a multi-use, corrosion-resistant epoxy primer used to seal undercoats and surfacing primers before applying finishes. Can be applied both above and below the waterline on a wide range of substrates, via spray or brush and roller.
- Dual purpose; seals both undercoats and surfacing primers in a single product
- Outstanding corrosion protection, increasing the longevity of your system
- Excellent adhesion to all substrates
PROPERTIES
D3001 HARDNER
Matt
Above and Below water
NA
518 g/L or 4.3 lbs/gal
Gallon, Quart
2 COLORS:
GRAY / WHITE
Specific Gravity 1.25
Available Packs 1 US Quart, 1 US Gallon
Base D8001 White Base, D1001 Gray Base
Converter D3001 Converter
Reducer T0006 (Spray), T0031 (Brush)
Equipment Cleaning T0002, T0006
TDS
SPANISH
MIXING RATIO SPRAY OR ROLL/BRUSH
SPRAY MIXING RATIO
Mixing & Reduction
Mixing and reduction requirements will vary according to individual conditions, climate, equipment choice/condition and other factors.
Mixing and application
of a small sample before full-scale application is recommended.
Application Methods Mix Ratio (Base:Converter) Reducer Recommended Thinning Spraying Viscosity
Base D8001 White Base, D1001 Gray Base
Converter D3001 Converter
Reducer T0006 (Spray), T0031 (Brush)
Brush, Roller 1:1 by volume T0031 5 – 10 %
Air Sprayed Atomized 1:1 by volume T0006 0 – 25 %
Mix by volume one part Base with one part Converter to a smooth, homogenous mixture.
COLD WEATHER ASSISTENCE
Brush Below 25°C (77°F) you may use COLD CURE Accelerator (M3066) to maintain dry and cure times.
Induction Time after Mixing = 15 Minutes.
